Quai Bridge ZurichOverview
The Bellevue is classified as one of Zurich‘s central traffic junctions. In addition to the frequent crossings of seven streetcars and two bus lines, around 60‘000 cars cross the Quai Bridge everyday. Furthermore, approximately 76‘000 people hop on and off at the stopping points of the public transport facilities on a daily basis.
In order to meet the requirements of the increase in traffic and to ensure the bridge‘s servicing, its complete surface had to be renovated. Sealings, pavements and rails were renewed, as well as handicap accessible fittings and two new stopping halls were constructed with the target of creating better harmonising with the surrounding historic buildings from 1939. Moreover, the Quai Bridge itself was broadened for the sake of granting more space for both pedestrians and cyclists.
mageba installed single gap joints featuring noise reduction sinus plates. Noise caused by overrolling traffic has hence been reduced by 80 %. Moreover, the joints were anchored with a special polymer concrete.
The main challenges were related to the geometric complexity with the combination of the streeetcar area, pedestrian area as well as dividing the project into several short stages with various site linkings. As the joint lies in the cross section pavement only, no futher intervention in the structure was required allowing for a quicker and more cost-effective installation. Also for future refurbishments, an intervention in the structure is no longer required.
Another benefit of the 100 % watertight ROBO-FLEX polymer concrete is its extremely low abrasion properties.
TENSA-CRETE single gap joints of type RE-LS 100
With rail trough and noise-reducing sinus plates
Steel composite bridge
1984 (new deck)
City of Zurich
WALO Bertschinger AG